What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 01:57

At one ohm, the resistor has a maximum of 1 watt power.
what exactly is a ‘surge’ protector?
The other is “what does a “fuse” do?”
I just cannot wake up early, even if I sleep on time. What should I do?
[image of Common-mode choke]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes Rainy Season and Lightning.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
These are simplified answers to the original question, and does not change anything I wrote above.
What thing happened to you as a child that you haven’t let go of to this day?
Here is a simplified AC power diagram.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The bolt then partially travels down the line to your home.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But it can get overloaded, and no longer works.
This device then solves the entire problem.
Advice for trying GLP-1 drugs for weight loss from a doctor who's been there - NPR
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then describes the function of a fuse.
Why do men like low maintenance women?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Barnstars:
but I think this circuit , shows a few more pieces.
2024–10–14 [Omar Gharbi Omar Gharbi ]
When do you feel most peaceful ever?
At least they know the answer if they wanted it.
Because the load is inductive, the current lags the voltage.(by a bit).
Upvotes:
What are some tips for braiding a woman's hair on a date?
This one hit behind the barn.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then asserts :
The third is lightning and “how it gets conducted into a home.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is 'the assistant's answer'
What does a fuse do?
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
One is “what exactly is in a ‘surge protector’ ? ”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Now when you have a certain ac resistance, then a current flows in a loop.
It seems Mohan does not understand the difference between a comment and an Answer.
One
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
A fuse is a non-resetable over current circuit protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What is lightning?
but this device (an Inductor) … impedes the rapid changes in the current.
In schematic diagrams this is the symbol for a fuse:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
eight
But… the neutral is now “floating” because of the 1 ohm resistance.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
First Sentence:
A circuit breaker is similar, but is resettable.
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
nine
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
For this case there are devices called Metal oxide varistors (MOV).
There are three different concepts here that are getting confused.
There are two important concepts here.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–16 [ OO OLAOYE OYEBODE ]
It also is a device that limits the change in current flow.
An AC voltage/ current source, and an ac inductive load.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These devices are installed between the “hot” and “neutral” and protective ground.
Edit 2024–10.
a photo is worth a thousand words.
(Dc diagram shown, AC is similar).
the problem then depends on "how fast does the fuse operate?".
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where the MOV conducts again, and dissipated the energy.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
so, what happens?